Acura MDX transmission problems

In this brief guide, we are going to provide you with the common Acura MDX transmission problems and what are the solutions to these problems.

Acura MDX Transmissions were made by Honda which has a 7-speed Dual Clutch Transmission. This transmission maximizes performance and fuel efficiency with millisecond-quick shifts and nearly seamless power flow. However, there are many problems with Acura MDX transmissions and we’ll tell you how you can solve them.

What are the common problems with Acura MDX transmissions?

Most of the common problems with Acura MDX transmission are:

• Hard up-shifting/down-shifting
• Delayed shifting
• Slipping Torque Converter
• Sensor Issues
• Internal Clutch failures

Why is hard up-shifting/down-shifting a problem with Acura MDX transmissions?

You would want a seamless and smooth shift even at low throttle input, so if your Acura MDX transmission is harshly shifting from one gear to another even at high throttle then there is definitely a problem.

What signs are shown by this Acura MDX transmission problem?

You will be able to hear the gear slip while driving and this would be a good sign if there is slipping. Also, an error code will be displayed if you use a diagnostic tool.

What is the solution to this Acura MDX transmission problem?

The solenoids of the gears might be worn out and need to be replaced. Also, there is a chance that these solenoids might also be broken. Rarely, complete mechanical failure occurs with these transmissions.

Why is delayed shifting a problem with Acura MDX transmissions?

While driving on road if you experience a delay or erratic moments while shifting from one gear to another gear then your Acura MDX transmission is surely having problems.

What signs are shown by this Acura MDX transmission problem?

Usually you would instantly notice this sign of the problem as you get a delayed sensation from the car when you try to shift. 

What is the solution to this Acura MDX transmission problem?

Visiting the nearest service center or your trusted mechanic would be the only way to solve this problem because this might be a serious transmission problem you are facing. 

Why is slipping torque converter a problem with Acura MDX transmissions?

If you are not getting the desired response from your torque converter when you release the brake and press the throttle pedal then you are most definitely experiencing torque converter slipping problems.

What signs are shown by this Acura MDX transmission problem?

There will be specific error codes shown from the diagnostic tool if the torque converter is slipping or has been broken or completely failed.

What is the solution to this Acura MDX transmission problem?

If the clutch of the torque converter is worn out then you need to replace it or else the stator might be broken which also might need replacing. In the worst case the entire assembly needs to be replaced if the state of the torque converter is beyond repair.

Why is sensor issues a problem with Acura MDX transmissions?

The transmission sensor malfunction indicates a possible problem that has been relayed from the transmission to the Powertrain Control Unit. It simply means that something went wrong in the electrical system that controls the Acura MDX transmission.

What signs are shown by this Acura MDX transmission problem?

P0700 is the code that will be shown if there is a transmission control system malfunction with the Acura MDX transmissions. This is a generic code which you will get using OBD-II for your transmission.

What is the solution to this Acura MDX transmission problem?

Clear all the error codes and see if it comes back by using the diagnostic tool. Check transmission fluid level and also its condition. If both of these options don’t work then go to your trusted mechanic.

Why are internal clutch failures a problem with Acura MDX transmissions?

As internal clutches are important for any vehicle and if a clutch is not engaging as it should then there is definitely a problem with the Acura MDX transmission.

What signs are shown by this Acura MDX transmission problem?

If you are finding it difficult to engage or if the clutch is not engaging at all then this can be taken as a sign that the transmission is not functioning well.

What is the solution to this Acura MDX transmission problem?

The engagement problem can be fixed by visiting a mechanic checking if there is a problem with the mechanical part of the particular gear in the transmission. Also the clutch pads need to be checked and repaired.

How to diagnose these common problems with Acura MDX transmission precisely?

To properly diagnose these problems, you need a scan tool to read these codes from the Transmission Control Unit. Firstly, If an Acura RDX transmission is malfunctioning, it immediately informs the driver with an error message on the screen. 

How to prevent getting these problems in the first place?

Regularly changing your gearbox oil and other lubricants may save you a lot of trouble and money in the future. Although many experts suggest different number miles for servicing, your car manual will give you a proper recommendation when you should change it.

FAQs: Acura MDX transmission problems

What year does MDX have transmission problems?

The first five year models of the Acura MDX (2001 – 2005) had a large number of problems with complete transmission failure at some point in their lives. They usually occur in the range of 100,000 – 130,000 miles so it isn’t early, but it costs over $4,000 for repairs.

Does the 2016 Acura MDX have transmission problems?

Yes, the reported 2016 MDX problems include transmission problems, in-car electronics issues, engine stalling, and check engine light issues. However, the 2016 Acura MDX has been known as one of the best three-row luxury SUVs. 

Conclusion

In this brief guide, we have provided you with the common Acura MDX transmission problems and what are the solutions to these problems. 

If you have any questions or comments please let us know.

Citations: