How to open a car hood without the release

Knowing “how to open a car hood without the release” will eventually help you in a time of crisis when there is an urgent need to open the car’s boot. Thus it is essential to address the issue. In addition, we will also give you a brief description of the different types of hoods available in the aftermarket.

How to open a car hood without lifting the release lever?

Steps for opening a car hood without release are:-

  • Press the hood down
  • Pull the hood cable from the inside.
  • Find the bonnet latch through the grille
  • Find a thin-ended screwdriver that can be used to reach the latch.
  • Hook the screwdriver or the wire over the latch and tug the boot open.

Opening hood without the use of release can be done in simple steps. However, to carry out this operation, you need to have specific tools such as screwdrivers to make your job easier. 

  • When opening the hood without using the release, you need to begin the procedure by pressing the hood down. This will disengage the interior latch. When you press the hood, the sticky cable between the latch and the hood gets stretched. Thus due to stretching, the cable might disengage the latch. Because most cars are designed to disengage the cable when the hood is pressed, moreover, while doing this, ask your assistant to pull the lever. 
  • Secondly, you can open the hood by pulling the hood cable inside. To perform this technique, you need to search for the cable under the dashboard. Mostly the cable is present near the interior release latch. Once you find the cable pull it gently.
  • When you pull the cable and the hood opens, there might be a scenario where the cable may have slipped or stretched, which has caused the hood not to open. Moreover, in a rare case, the cable might have got broken as well. 
  • Another scenario when you find the cable below the dashboard can be where you don’t feel any tension in the cable. In that case, the cable is completely detached from the latch. 
  • Find the bonnet latch through the grille. Once you find the latch through the grille, you will need a way to reach the cable from a different angle. Alternatively, the latch might be reachable from the driver’s side fender wall. Because in many cars such as Honda, the latch cable passes through the inner side of the fender wall. To reach the latch cable, you need to remove the clips attached to the fender wall. Once you reach the cable, you need to pull it to open it. However, this will only work if the cable is attached to the hood latch.
  • If you successfully find the latch through the front grille, you need to find a thin-ended screwdriver that can be used to reach the latch. Moreover, if the gaps in the grille are small, you can also use a flexible wire to reach the latch. Moreover, you can also remove the grille to get more access. Once you reach the hood latch, you need to hook the screwdriver or the wire over the latch and tug the boot open.
  • If you can’t reach the latch from the front, you can reach the latch from the bottom of the hood. This is the last chance. If this doesn’t work, you need to take the vehicle to a mechanic. In this technique, you need to reach the latch from below the hood and with the pair of pliers tu the wire. You can use a jack to get below the hood easily.
  • Before getting below the car, make sure the engine is cool. Because the engine is hot, it can cause severe burns on your body.

4 Types of Bonnets available in the market

When choosing a hood for your vehicle, you want to get the best custom hood. Therefore, for buying a hood in the aftermarket, you need to search the product by make, model, colour, and size. Thus searching for a hood by following the systematic process helps you get the perfect hood for your vehicle. There are 4 types of different hoods which are mentioned below:

Cowl Hoods

Cowl hoods are ready to fit hoods. These hoods allow the intake air to be forced quickly into the intake manifold. This process of forcing the air into the intake manifold for the combustion process is also termed cowl induction. Hence the hood was named as cowl hood. The process of fitting the cowl hood involves the adjustment of the previous hood. As a buyer, you need to find the exact size of the cowl for your vehicle. The cowl is attached to the top of the existing hood. 

A cowl fitted on the top of the already existing hood increases the quantity of air entering the intake manifold. Thus a cowl on the top of the hood increases the engine performance drastically.

Carbon Fiber Hood

A carbon fibre hood is available in different sizes and colours. The lightweight carbon fibre hood provides proper air circulation inside the hood. Thus a Carbon fibre hood contributes to producing a high performance for your vehicle.

Fibreglass hood

Fibreglass hoods are easy to assemble, and they provide efficient ventilation for the hot air trapped inside the hood and the engine. Similar to carbon fibre hoods, fibreglass hoods are also available in different sizes and colours. Moreover, since fibreglass is used to make the hoods, the chances of dents and minimal.

Steel Hoods

Steel hoods are conventional hoods. These hoods are heavy, large, and bulky. However, steel hoods are available at a lower price compared to other hoods. These hoods also provide proper ventilation for the air trapped between the engine and the hood and thus allow the engine to perform better. 

Conclusion

In this article, we have addressed “How to open a car hood without the release.” Moreover, we have also explained the different types of hoods available in the aftermarket.

Frequently Asked Questions (FAQs): How to open a car hood without the release

What do the British call the hood of the car?

The British call the hood of the car a bonnet. In contrast, the Americans pronounce it as the hood. 

Why do cars need hoods?

A hood is a device installed to protect the vehicle performance parts like the engine, alternator, battery, etc. Moreover, they also provide technicians access to perform repairs and maintenance.

How can I remove the hood of my car?

The car hood has two fasteners, one on the driver’s side and the other on the co-driver’s side. All you need to do is remove the two fasteners for removing the car’s hood. 

References

  1. https://www.doityourself.com/stry/4-types-of-custom-hoods
  2. https://www.wikihow.com/Open-the-Hood-of-a-Vehicle

Leave a Comment