What to do if a power seat is stuck in recline?

This article will address the “Power seat stuck in recline” problem. Moreover, we will also explain to you the troubleshooting procedure. In addition, we will also explain the safety features of a car seat.

What to do if a power seat is stuck in recline?

If a Power seat is stuck in recline, you can do the below things:

  • Disconnect the seat motor from the car’s battery.
  • Loosen the seat recline
  • Search for the faults in the mechanical system.
  • Disconnect the screw mechanism responsible for moving the seat
  • Grease the bolt threads and simultaneously move the nut to check the smoothness.
  • Install the bolt and nut mechanism back on the seat.
  • Press the recline button and check whether the seat is moving

Causes of power seat stuck in one position

The power seat of your car can be stuck in one position for several reasons. However, some reasons which might have caused the fault in the power seat are:-

  • Mechanical or electrical failure.
  • The car seat Recline motor is faulty.
  • Some debris has stuck in the recline mechanism.
  • The recliner locking mechanism is rusted due to moisture.
  • The seat recline switch is damaged.
  • The wiring has got damaged.

Fixing the car seat recline stuck in one position

  • There can be a scenario where the driver is pressing the recline switch, but the seat backrest isn’t changing the position. Moreover, on pressing the recline switch, the driver can hear the motor working, but the motor isn’t moving the recline. 
  • The person should disconnect the seat motor from the car’s battery in such a case. After this, they should check whether the other power seats features are working properly. If they are working properly, there is a fault in the mechanical system that reclines the seat.
  • To fix this issue, the person should loosen the seat recline present between the seat’s lower cushion and the backrest. Then after loosening the screw, they should unscrew the seat’s bolts from the car and move the seat out.
  • Once the seat is out of the car, the technician will better view the seat’s electrical connections and mechanical components. Now since the electric motor was working perfectly, the technician should search for the faults in the mechanical system.
  • The power seat recline has an electric motor that actuates a screw mechanism. When the driver presses the recline switch present either on the door handle or on the side of the seat, the motor rotates the screw mechanism, which then moves the seat backrest forward or backwards depending on the user input.
  • Now the screw on which the seat reclines is open to catching moisture. Thus, this moisture can cause the screw threads to rust, restricting the seat from reclining.
  • The technician needs to disconnect the screw mechanism from the car seat to solve this issue. When they get the mechanism out, they will see a screw and a nut rotating on the screw threads. Due to rusting, the nut will require greater force to move on the screw; thus, due to this reason, even when the electric motor is working perfectly, the seat is not reclining because the nut requires greater force than what is generated by the electric motor.
  • Therefore to get the bolt and nut mechanism working again, the technician should properly grease the bolt threads and simultaneously move the nut on the bolt to check the smoothness in the movement of the nut. When the nut starts to rotate on the bolt without any resistance, the bolt and nut mechanism is ready to be installed on the car seat.
  • Install the bolt and nut mechanism on the seat, lift the seat into the car and bolt it to the car body, tighten the seat recline bolt present between the lower cushion and the recline and connect all the electrical connections back.
  • Now press the recline button and check whether the seat is moving. In most cases, the seat backrest starts to operate because after greasing, the mechanism becomes well lubricated, and the effect of rusting is eliminated.  

Safety features in a Car Child Seat

Installing a child car seat is extremely important for enhancing your child’s safety. Many parents avoid installing car seats which can prove extremely hazardous in accidents. A car seat gives better protection to the baby when compared to the parent who holds them in their hands.

Seat Belt Guides

Many car seats have seat belt guides present on them, which secure the child with the assistance of the car’s seat belt system. These seat belt guides on the car’s seat ensure that the child is optimum.

Side Impact Position

Car child seats have side impact protection, which maintains the baby’s head, neck and spine alignment in an accident. The energy-absorbing foam present in the side impact protection distributes the accident impact evenly.

Impact Protection Shield

An impact protection shield is a 5-point harness shaped like a bar. It is placed across the chest and midsection of the baby. In an accident, the impact protection shield disperses the force evenly.

Performance Chest pads

The chest pads disperse forces in the event of an accident. Moreover, these pads ensure that the baby is held securely and doesn’t lurch around.

Lateral Headrests

The lateral headrest provides cushioning to the baby’s head from the sides while keeping the head in a central position. As a result, it restricts the impacts on the baby’s body when the car enters a pothole.


In this article, we have addressed “Power seat stuck in recline.” Moreover, we have also explained some of the causes of seat recline getting stuck. Apart from that, we have also explained some safety features of the child car seat.

Frequently Asked Question (FAQs): Power seat stuck in recline.

How do I get my car seat unstuck?

Suppose one button is clicked and another one is not clicked. Then the seat won’t move. For moving the seat, in that case, you need to shake the seat a bit which will get the other seat switch working.

How do you change a power seat switch?

  • Locate the power seat switch.
  • Remove the seat trim panel to get access to the backside of the power seat switch.
  • Examine the power seat switch inputs to ensure that the switch has power and ground.
  • Connect the power and ground to the power seat motor.
  • Remove the switch connector.

How does the power seat switch work?

The power seat switch is attached to the motor connected to the vehicle’s electrical system. When you press the button, the button sends a signal through the wiring to the motor, and the seat operates.

What is a power seat switch?

The power seat switch in the car allows you to adjust the seat according to your preference. If the switch is broken, it should be replaced immediately.


  1. https://www.youtube.com/watch?v=0Ok0vV9fWng
  2. https://www.youtube.com/watch?v=-54f41uQ_H0
  3. firstcry.com/buying-guides/car-seat/safety-features

Leave a Comment