List of Yamaha Breeze Transmission Problems (5 Warning Signs)

In this brief guide, we are going to provide you with common problems with Yamaha Breeze transmission and what you can do to rectify these problems before they worsen.

Yamaha Breeze has CVT or Continuously Variable Transmission for seamless shifts through unlimited range to gear ratios while driving. However, there are many problem symptoms with IVT transmissions and we’ll tell you how you solve them.

Yamaha Breeze Transmissions are a type of Continuously Variable Transmission and have a global reputation for quality, reliability and durability but there are some common problems with the Yamaha Breeze CVT transmission.

What are the common problems with Yamaha Breeze transmission?

Some of the most common problems with Yamaha Breeze transmission are:

  • Torque converter malfunction
  • Delayed shifting
  • Transmission fluid leakage
  • Transmission slippage
  • Transmission overheating

Why is Torque converter malfunction a problem with Yamaha Breeze transmissions?

If your torque converter or if you are not getting the desired response when you release the brake and press the throttle pedal then you are most definitely experiencing torque converter engagement or disengagement problems.

What are the signs of this problem with the Yamaha Breeze transmission?

Firstly you would be unable to stop the car when releasing the throttle pedal for disengagement problem and secondly for engagement from even if you press too much throttle the car will not move forward.

How to solve this Yamaha Breeze transmission problem?

If the clutch of the torque converter is worn out then you need to replace it or else the solenoid might be broken which also might need replacing. In the worst case the entire assembly needs to be replaced if the state of the torque converter is beyond repair.

Why is Delayed shifting a problem with Yamaha Breeze transmissions?

While driving on road if you experience a delay or lack of response while pressing the throttle or shifting from one speed to another speed then this could result in an unpleasant drive for you. So, this is a problem with your Yamaha Breeze transmission.

What are the signs of this problem with the Yamaha Breeze transmission?

Usually you would instantly notice this sign of the problem as you get a hesitation sensation or slow response from the car when you try to shift.

How to solve this Yamaha Breeze  transmission problem?

Resetting the software settings or checking the gear ratio sensors could be a solution. Also, visiting the nearest service center or your trusted mechanic would be the only way to solve this problem because this might be a serious transmission problem you are facing.

Why is Transmission fluid leakage a problem with Yamaha Breeze  transmissions?

Yamaha Breeze transmissions are very advanced and leakage proof systems and if anything is leaking out of them then this could cause transmission overheating. It is definitely a sign of a problem which may cause serious trouble for you in the future.

What are the signs of this problem with the Yamaha Breeze transmission?

You would get an error such as P0842 or errors in the similar range which are associated with transmission fluid pressure. If these sensors get a low pressure this will indicate there is not enough fluid and a leakage somewhere in the transmission.

How to solve this Yamaha Breeze  transmission problem?

Detecting where the leak is and closing it, is the most obvious solution to fix this sign before it causes mechanical damage to your car. Usually the gaskets or the seals in the transmission are worn out or broken to cause a fluid leak.

Why is Transmission slippage a problem with Yamaha Breeze transmissions?

Yamaha Breeze transmission system is not designed to slip and if you are experiencing slippage then it could cause slow response or further damage to the transmission system. So, it is definitely a sign of a problem with the mechanical components of the transmission.

What are the signs of this problem with the Yamaha Breeze transmission?

You will be able to hear the gear slip while driving and this would be a good sign if there is slipping. Also, an error code will be displayed if you use a diagnostic tool.

How to solve this Yamaha Breeze transmission problem?

The solenoids of the two gears might be worn out and need to be replaced. Also, there is a chance that these solenoids might also be broken. Rarely, complete mechanical failure occurs with these transmissions.

Why is Transmission overheating a problem with Yamaha Breeze transmissions?

Because Yamaha Breeze transmission mechanical components tend to get damaged, worn, and malfunction under high heat levels. This results in lower than the acceptable performance from the vehicle and high fuel consumption as well as lowering the life of the gearbox.

What are the signs of this problem with the Yamaha Breeze transmission?

A few common signs are slow response while accelerating and not getting the desired drive when needed. Also, you could see some sort of malfunction sign on the dashboard.

How to solve this Yamaha Breeze transmission problem?

Check the transmission oil and its level. If it is too low then fill the required amount of oil in the transmission. If it is too dirty, then drain the entire oil from the transmission and fill it again.

How to precisely diagnose these common problems in Yamaha Breeze transmission?

If you need to precisely diagnose these common problems then you need to use a diagnostic tool which is software based and can be connected to the vehicle electronic system as Yamaha Breeze transmission fully electronically controlled CVT transmission.

How to prevent getting these problems in the first place?

To prevent these problems, you need to change the Yamaha Breeze transmission oil as per the manual or when it is too dirty. This is the easiest and most effective way to take care of your vehicle transmission and also drive your vehicle in a recommended way.

FAQs: Yamaha Breeze transmission problems

How to disassemble Yamaha Breeze transmission?

Firstly, Pull the side cover off the left side of the engine and inspect the belt and sheaves for damage and wear. If the unit has been in deep water, water could have gotten in the side cover and caused the belt to slip. Water acts as a lubricant and causes the belt to slip.

How do you adjust the idle on a Yamaha Breeze?

To properly adjust the idle try rotating the pilot screw, screw it in and lightly bottom it out, then back it out 2 turns. Start the engine, set the idle of the quad slightly higher than normal and then adjust the pilot screw until the engine idles the highest and then back out 1/2 turn.

Conclusion

In this brief guide, we have provided you with common problems with Yamaha Breeze transmission and what you can do to rectify these problems before they worsen.

If you have any questions or comments please let us know.

Citations:

https://atvconnection.com/forums/drivetrain-suspension-tires/365660-yamaha-breeze-125-transmission-problem.html